Reference catalogs · instrument
Hohmann Transfer Orbit Calculator
The current ledger marks this instrument verified with errata that must be applied at binding time.
Ledger state
The current ledger marks this instrument verified with errata that must be applied at binding time.
- Area
- Physics — Kinematics/Projectiles/Orbits, Forces/Energy/Momentum, Rotational Dynamics, Gravitation, Oscillations/Waves, Optics, E&M Fields, Relativity, Quantum, Statistical Thermo
- Tranche
- tranche-4
- Evidence ID
- t4-059
- Ledger rows
- 1
No ledger note is attached.
Review findings
The honest label is substantially correct for an idealized coplanar circular-to-circular Hohmann transfer, but the product needs an explicit Δv2 formula, an inward/outward sign or magnitude convention, a total-Δv definition, and positive-input/unit validation before it can be labeled PASS.
Formula and scope findings
- The transfer semi-major axis formula a_t=(r1+r2)/2 and transfer time formula T_transfer=π√(a_t^3/GM) are correct for the ideal two-body, coplanar Hohmann half-ellipse, with T_transfer measured from the first impulse to the second.
- Δv2 is stated only as 'analogous', which is ambiguous. For an outward transfer (r2>r1), the standard positive burn magnitude is Δv2=√(GM/r2)·(1−√(2r1/(r1+r2))).
- The stated Δv1 formula produces a signed negative value for an inward transfer (r2<r1), whereas a delta-v budget normally reports the positive magnitude. The implementation must explicitly choose signed burns or magnitudes and handle inward and outward transfers consistently.
- Total Δv is not explicitly defined; for a budget it should be |Δv1|+|Δv2|, not an unqualified algebraic sum.
Unit assumptions
- GM must use units consistent with radii: if GM is in km^3/s^2 and radii are in km, delta-v is in km/s and transfer time is in seconds.
- All radii are positive distances from the central body's center, not altitudes above its surface.
- GM is the gravitational parameter μ=G·M and must be positive.
- The standard formulas assume two-body Keplerian motion, circular initial and final orbits, coplanar orbits, and instantaneous tangential impulses.
Boundary hardening
Recorded hazards
- Division-by-zero or invalid square roots occur if GM≤0 or either radius≤0; these inputs require validation.
- The calculator should reject or explicitly define the r1=r2 case. It is mathematically valid with zero delta-v and a half-period equal to half the circular orbital period, but it is not a transfer requiring two impulses.
- Without a stated sign convention, inward-transfer delta-v values can be negative even though a delta-v budget is conventionally nonnegative.
- A km^3/s^2 GM combined with radii in meters, or an m^3/s^2 GM combined with radii in kilometers, gives numerically wrong outputs by large scale factors.
- The formulas omit plane changes, finite-burn effects, atmospheric drag, third-body perturbations, eccentricity, and non-circular initial or final orbits.
Errata and corrections
Tranche errata
delta_v1/total · vector 2
0.976598 / 1.795813
0.976698 / 1.795913
6.313478×0.154701 digit slipdelta_v2/total · vector 3
0.976598 / 1.795813
0.976698 / 1.795913
same slip, symmetric vector
Inspectable example
4 review vectors are recorded. One source-bound sample is shown below.
{
"inputs": {
"GM_km3_s2": 398600,
"r1_km": 7000,
"r2_km": 10500
},
"expected_outputs": {
"a_t_km": 8750,
"delta_v1_km_s": 0.720234,
"delta_v2_km_s": 0.650468,
"total_delta_v_km_s": 1.370702,
"transfer_time_s": 4072.802
},
"working": "a_t=(7000+10500)/2=8750 km. v_c1=√(398600/7000)=√56.942857=7.546049 km/s. Δv1=7.546049·(√(21000/17500)−1)=7.546049·(√1.2−1)=7.546049·(1.095445−1)=0.720234 km/s. v_c2=√(398600/10500)=√37.961905=6.161323 km/s. Δv2=6.161323·(1−√(14000/17500))=6.161323·(1−√0.8)=6.161323·(1−0.894427)=0.650468 km/s. Total Δv=0.720234+0.650468=1.370702 km/s. T=π√(8750^3/398600)=π√1680687.4=π·1296.413=4072.802 s."
}
Sources and evidence
These pointers bind the page to evidence. They do not grant authority or collapse verification into deployment.
VERIFIED_LEDGER.json · VERIFIED_WITH_ERRATAevidence-tranche4/tranche4-results.json